TOP >  Mixing Technology >  Cooker/Steam Mixer >  SME-MP Series

 

SME-MP Series

■Basic Functions

SME-MP SeriesLiquids containing a solid component can be directly heated by steam. Using an air-powered steam nozzle developed in-house, this device prevents counter-flow of the liquid into the steam pipe. It is used primarily for heating pulp ingredients for the manufacture of paper pulp, and for heating resin slurries for use in chemical manufacturing.

■Standard Specifications

Diameter 2 1/2″~12″
Material 304S.S, 316S.S, 316LS.S
Number of Elements 4
Element Fixing Edge seal
Fixing Flange (JIS10K-FF, 20K-RF)
Finish Inner surface buffed

■Dimensions

Dimensions

Model Nominal 
Diameter (ND)
Steam
kg/h
Hot 
water
m3/h
Outside
Diameter 
(OD)
ODmm
Inner
Diameter 
(ID)
IDmm
Thickness
Tmm
Length
Lmm
Mass
kg
SME-MP 65-32 21/2″ * 15~22 76.3 65.9 5.2 844 30
SME-MP 80-32 3″ 20~35 89.1 78.1 5.5 1004 40
SME-MP100-32 4″ 35~60 114.3 102.3 6.0 1224 60
SME-MP125-32 5″ 55~90 139.8 126.6 6.6 1464 85
SME-MP150-32 6″ 75~160 165.2 151.0 7.1 1624 130
SME-MP200-32 8″ 130~280 126.3 203 6.65 2444 180
SME-MP250-32 10″ 200~450 267.4 254 6.7 2744 300
SME-MP300-32 12″ 320~630 318.5 305 6.75 3204 320

*Steam Pressure: 0.5 MPaG
The table of dimensions above applies to the entire length and weight with four steam nozzles and four elements.
Note: Steam flow is set, and steam nozzle quantity determined, according to the temperature increase, so overall length and weight may vary.

■Related Applications