TOP >  Mixing Technology >  Static Mixer >  Option Parts >  Injection tees

 

Injection tees

injection tees(standard,sanitary)


These Injection tees are inlets special l y designed to allow the maximum mixing effect of the static mixer.
We recommend their use for applications that have large fluid flow ratios.

injection tees(auto)

This type has an automatic On/Off switch at the tip of the injection tee’s inlet nozzle.
This prevents the main fluid from flowing to the inlet side when the infusion is stopped.


■Standard Specifi cations

Material 304 S.S, Ferrule
Fixing JIS 10K Flange

PAT.2045307

■Model Code Chart

When installed with a Static Mixer.

A“ /T” is added to the end of the Static Mixers Model Number.
Example) 1-N60-331-1/T

Model Code Chart

Model Code Chart

■Dimensions

Standard Type

Standard Type

Model Nominal
Diameter (ND)
(1)

Amm

Bmm
T-□/15-3 1/2″ 90 80
T-□/20-3 3/4″ 90 80
T-□/25-3 1″ 110 100
T-□/40-3 1 1/2″ 110 100
T-□/50-3 2″ 140 115
T-□/65-3 2 1/2″ 150 120
T-□/80-3 3″ 150 120
T-□/100-3 4″ 160 150
T-□/125-3 5″ 180 170
T-□/150-3 6″ 190 180
T-□/200-3 8″ 240 230

Size of flange (2) is decided by the conditions of the flow.

Sanitary Type

Sanitary Type

Model Nominal
Diameter (ND)
(1)

Amm

Bmm

Cmm

Dmm
T-□/25-3/S 1S 55 55 53 110
T-□/40-3/S 1 1/2S 70 70 53 125
T-□/50-3/S 2S 82 82 56 140
T-□/65-3/S 2 1/2S 105 105 58 165
T-□/80-3/S 3S 110 110 58 170

Size of flange (2) is decided by the conditions of the flow.
Joint can be changed to IDF Screw & Nut

Auto On/Off Type

Auto On/Off Type

Model Nominal
Diameter (ND)
(1)

Amm

Bmm
TA-□/25-3 1″ 40 60
TA-□/40-3 1 1/2″ 50 75
TA-□/50-3 2″ 100 100
TA-□/65-3 2 1/2″ 100 150
TA-□/80-3 3″ 100 150
TA-□/100-3 4″ 135 150
TA-□/125-3 5″ 145 150
TA-□/150-3 6″ 170 150
TA-□/200-3 8″ 195 150
TA-□/250-3 10″ 205 150
TA-□/300-3 12″ 260 150
TA-□/350-3 14″ 280 150

Size of flange (2) is decided by the conditions of the flow.Joint can be changed to ferrule type.